Chapter IX · Fruit wines
In Georgia, wine and spirits have long been made at home from fruit: pomegranate, quince, cornelian cherry, cherry plum, mulberry and blackberry. This page translates nine traditional fruit wines into the language of modern technology: how much fruit, water, sugar and additives a given volume needs, and when the wine will be ready.
The recipes are illustrative and based on the typical composition of the fruit: measure your own juice Brix and acidity and enter them in the fields. About 8% loss is allowed for in the volume (lees, racking). Doses: potassium metabisulphite (57% SO₂), diammonium phosphate 0.2 g/L, oenological tannin, and potassium sorbate 0.2 g/L only for wine with residual sugar.
The times are typical and depend on temperature, yeast and fruit. Confirm the end of fermentation by measuring sugar (density < 0.996 two days in a row), and before bottling check haze, pectin and protein tests.
In Georgia, fruit drinks are mostly made at home. The best known are fruit spirits (for example, mulberry and cornelian cherry), but families also make pomegranate, quince, cornelian cherry, cherry plum, blackberry, mulberry and sour cherry wines. The recipes on this page offer a modern technological description of these fruits: how to prepare the must, ferment, age and bottle a wine that is safe and does not spoil within a year.
According to the Law of Georgia on Vine and Wine, wine is an alcoholic beverage of grape origin obtained only by complete or partial alcoholic fermentation of grapes, grape must or pulp. The law does not address fruit wines separately: they fall outside the scope of the vine and wine law, and the general requirements for food products apply to them.
In the EU the word "wine" is likewise reserved for grape products, but Part II of Annex VII to Regulation 1308/2013 allows member states to permit the term "wine" when it is accompanied by the name of a fruit in a composite name (e.g. "pomegranate wine") or is part of another composite name, so that confusion with grape wine is avoided.
If you plan to sell fruit wine, check the current labelling and registration requirements at matsne.gov.ge and with the National Food Agency. This page is for information and is not legal advice.
| Wine | Style | Alc., % | TA, g/L | Residual sugar, g/L | Process | Main difficulty |
|---|---|---|---|---|---|---|
| Pomegranate | dry red | 12 | 7 | 0 | juice | costly juice, tannic peel |
| Quince | semi-dry white | 12 | 7 | 15 | pulp 2 days | pectin, methanol |
| Blackberry | semi-sweet red | 12 | 7 | 30 | pulp 4 days | fast colour loss |
| Cornelian cherry | semi-sweet red | 11 | 8 | 40 | pulp 3 days | very high acidity |
| Cherry plum | semi-sweet | 11 | 8 | 35 | juice | acidity, stones |
| Mulberry | dry red | 12 | 6.5 | 4 | pulp 3 days | low acidity, high pH |
| Apple | dry white | 11 | 6.5 | 4 | juice | oxidation, low nitrogen |
| Sour cherry | semi-sweet red | 12 | 7 | 30 | pulp 3 days | stones |
| Pear | semi-dry white | 11 | 6 | 12 | juice | low acidity and tannin |
The recipes are illustrative and based on the typical composition of the fruit (see "Preparing fruit must"). In the calculator, enter the measured Brix and acidity of your own juice: fruit varies a lot from year to year and from variety to variety.
1. Sorting and washing: remove rotten and damaged fruit, which increases methanol and volatile acidity.
2. Crushing and SO₂: ~50 mg/L SO₂ (as potassium metabisulphite) limits wild microflora and oxidation. Do not crack the stones of stone fruit.
3. Pressing or maceration: for white wine, press the juice; for red, leave it on the pulp for 2–4 days. Use pectinase only to extract juice, briefly and with a low-PME preparation (see "Pectin and methanol").
4. Must adjustment: water, sugar and acid by mass balance (see "Preparing fruit must"); part of the sugar can be added during the first days of fermentation.
5. Yeast and nutrient: dry yeast (~0.2 g/L) and diammonium phosphate (~0.2 g/L); fruit must is poor in nitrogen.
6. Fermentation: whites at 15–20 °C, reds at 20–25 °C; usually 10–14 days.
7. Racking and clarification: after fermentation, rack off the lees, add ~40 mg/L SO₂ and rack again a month later. Use the pectin test to check the cause of haze.
8. Ageing: 3–6 months in a cool place, in a full vessel.
9. Stabilisation and sweetening: wine with residual sugar needs SO₂ and potassium sorbate (~0.2 g/L) along with the sugar, or sterile filtration.
10. Bottling: after 1–2 months of bottle rest the wine is ready; fruit wines are mostly drunk young, within 1–2 years.
Pomegranate: the juice is pressed from the arils (seeds); the peel and white membranes are very astringent and make the wine coarse if they get into the juice. Pomegranate ellagitannins give the wine structure and colour stability.
Quince: hard and poor in juice, but very aromatic. Crushed quince needs a short standing time; it is rich in pectin, so methanol control is especially important.
Cornelian cherry: acidity reaches ~30 g/L, so it needs 3–4-fold dilution and residual sugar; the juice share drops below 35% and the aroma weakens. It is better to blend cornelian cherry with a less acidic fruit (e.g. apple).
Cherry plum: sour and juicy; the wine is light and fruity. Do not crack the stones.
Mulberry: sweet, almost acid-free and high in pH, so adding acid and tannin is essential, otherwise the wine is microbiologically unstable.
Blackberry and sour cherry: intense colour and aroma, but the colour changes quickly because of low tannin (see "Body, tannin and colour").
Apple and pear: the wine comes close to cider; the main dangers are oxidation and low nitrogen; pear also needs added acid and tannin.
• Methanol: fruit wine may contain more than grape wine; be especially careful with pectin-rich fruit and long maceration.
• Stones: the stones of apricots, sweet and sour cherries, plums and cherry plums contain amygdalin; do not crush them.
• Distillation: when fruit wine is distilled at home, methanol is concentrated in the heads of the spirit; the heads must be discarded.
• Refermentation in the bottle: wine with residual sugar can burst the bottle without stabilisation.
Law of Georgia on Vine and Wine, Article 3 (matsne.gov.ge); Regulation (EU) No 1308/2013 of the European Parliament and of the Council, Annex VII, Part II; R. S. Jackson, Wine Science (Academic Press), chapter on fruit wines; D. W. Lachenmeier, Methanol Mitigation during Fruit-Spirits Manufacturing (2021); the previous pages of this chapter. The recipes and times are illustrative.
1. In the "Batch planning" mode, choose a recipe and the desired amount of wine. Enter the measured Brix and acidity of your juice (or leave the typical values). The cards show the amounts of fruit, water and sugar and the juice share, and the table lists additives by stage.
2. In the "Calendar" mode, choose a recipe and a start date to get the dates for the end of fermentation, racking, bottling and readiness, and a chart of the process.
• Pomegranate wine, 20 L: ~28 kg of pomegranates (~13 L of juice), ~7.5 L of water, ~2.5 kg of sugar; dry, 12%.
• Cornelian cherry wine, 20 L: ~10.5 kg of cornelian cherries, ~14 L of water, ~3.2 kg of sugar for fermentation and ~0.8 kg for sweetening; the juice share is only ~27%, so the calculator recommends blending.
• Pomegranate wine started on 13 November: fermentation ends around 26 November, bottling is in July and the wine is ready in September.
• Always measure the juice Brix and acidity: the recipe is a guide, not an exact formula.
• Add sugar in portions, and add the sugar meant for sweetening only at stabilisation (SO₂ + sorbate).
• Store red fruit wines cool and drink them within the first two years.
• Keep a record of each batch's numbers (Brix, acidity, dates, additives); this way you will build your own recipe for your fruit.
1. Why is cornelian cherry wine made with heavy dilution and sweet?
To get down to 7–8 g/L acidity, cornelian cherry juice must be diluted 3–4 times, so the aroma weakens; residual sugar softens the remaining acidity.
2. Why should PME-containing pectinase not be added to quince pulp for a long time?
Quince has one of the highest methanol potentials. To extract juice, a short treatment with a low-PME preparation, or crushing and quick pressing, is better.
3. What must be added to semi-sweet fruit wine before bottling?
Residual sugar is food for yeast. Sorbate blocks yeast growth, and SO₂ protects against bacteria and oxidation.