Home cellar · practical guide
Enter how many grapes you have, what wine you want and when you pick, and get a personal plan: every step with a date, the tools needed, exact amounts of materials and an explanation of why it is done this way.
Dates and amounts are a guide: fermentation will finish a few days earlier or later depending on temperature and grapes. You always decide by measuring, which is why every step says what to measure. Ticks are stored in this browser.
Amounts are computed from the first mode. Potassium metabisulphite (K₂S₂O₅) releases 57.6% SO₂; yeast 25 g/hL; diammonium phosphate (DAP) 20 g/hL if the must is short of nitrogen (legal limit 100 g/hL). You fill in the price column yourself.
Record density and temperature once or twice a day, at the same time. Entries are stored in this browser; save them as a CSV file from time to time. For analysis and a forecast, enter the same data on the "Fermentation kinetics" page.
Making wine means managing living processes. Grape juice contains sugar, acids, aroma and phenolic compounds; on its surface live thousands of kinds of yeast and bacteria. The winemaker's task is to let the "useful" microorganisms (yeast and lactic acid bacteria) work and to stop the "harmful" ones: vinegar bacteria, mould, film yeast. Almost every step serves these two aims.
Each step on this page rests on the other chapters of the laboratory: the why and the how much are explained there, with formulas and calculators. Here each stage's purpose is described briefly.
Most wine faults are microbiological: vinegar bacteria (Acetobacter) turn alcohol into acetic acid, Brettanomyces yeast gives a horse-sweat smell, mould gives earthy, mouldy smells. These microorganisms live on vessel walls, in scratches and in old lees. So a vessel is first cleaned (soda or percarbonate dissolves organic residue), then sanitised (an acidic SO₂ solution kills microbes). Sanitising does not work on an unclean surface.
Sugar decides the alcohol: each 1 Brix gives ≈ 0.57% alcohol. Acidity decides freshness and microbiological stability: a low pH (3.1–3.5) holds back bacteria and makes SO₂ active. Phenolic ripeness (colour, ripe tannin) matters especially for red and Kakhetian wine. Healthy grapes matter most: rotten berries contain the enzyme laccase, which browns the wine and is not stopped by SO₂.
In the European method white wine ferments as juice only, at low temperature (15–18 °C): this keeps its fruity aroma, and it has almost no tannin. Such wine is sensitive to oxygen and needs protection with SO₂.
In the Kakhetian method white grapes ferment together with the pomace (skins, seeds, often stems) and then stay on the pomace for several months. The wine is amber, tannic and stable: its phenolics protect it from oxidation, so it needs less SO₂.
Red wine ferments on the skins so that colour and tannin are extracted; it is pressed at the end of alcoholic fermentation and then goes through malolactic fermentation.
Yeast turns sugar into alcohol and CO₂ and releases heat: ≈ 0.55 kJ per gram of sugar. In a large vessel this heat cannot escape and the temperature can rise by more than 10 °C. Above 30–32 °C the yeast dies and fermentation stops. Density shows the progress: sugar is heavy and alcohol light, so density falls from 1.08–1.10 to 0.99–0.995.
When fermenting on skins, CO₂ lifts the pomace to the surface and forms a "cap". The cap is in contact with air, warms and dries: an ideal place for vinegar bacteria. That is why it is punched down several times a day.
When fermentation ends, CO₂ is no longer released and the wine is no longer protected from oxygen. Hence the main rule: vessels always full and closed. Malolactic fermentation (in red and Kakhetian wine) softens the wine and makes it biologically stable. Then the wine is racked off its lees, protected with SO₂ and kept cool until it clears and is ready for bottling.
Sulphur dioxide (SO₂) does two things in wine: it suppresses microbes and slows oxidation. At home it is most often used as potassium metabisulphite powder (K₂S₂O₅), which releases 57.6% of its weight as SO₂. Healthy must gets 30–50 mg/L, damaged must 50–70 mg/L; after fermentation the wine should have 25–35 mg/L of free SO₂. The active form of SO₂ depends on pH: the lower the pH, the less SO₂ is needed. Traditional qvevri wine is often made with no or minimal SO₂; in that case cleanliness, full vessels and cold are all the more important.
| Quantity | Typical value | Where it is explained |
|---|---|---|
| Must sugar | 20–24 Brix (density 1.083–1.100) | Must sugar |
| Total acidity | 5–8 g/L | Acids and pH |
| pH | 3.1–3.6 | Acids and pH |
| Fermentation temperature | white 15–18 °C, on skins 20–28 °C | Fermentation thermodynamics |
| Density of dry wine | 0.990–0.996 | Fermentation kinetics |
| Free SO₂ in storage | 25–35 mg/L | Must preparation |
| Storage temperature | 10–15 °C | — |
1. In the "Plan" mode enter the amount of grapes, choose the style, harvest date, fermentation vessel and grape condition, and decide whether you add SO₂ before fermentation and which yeast you use.
2. You get a list of steps with dates. Click a step to open it: why it is done, what to do, which tools and materials you need (amounts are calculated for your grapes), what to measure and what to watch out for.
3. Tick a step when it is done: the next one opens automatically, and the top card shows your progress. Ticks and your data are stored in this browser, so you can come back to the page at any time.
4. In the "Shopping list" mode you see what to buy and how much. Enter the prices and the total is calculated automatically.
5. In the "Fermentation journal" record density and temperature every day. The chart shows how fermentation is going; the green line (0.996) is the threshold for dry wine. Save the entries as a CSV file from time to time.
6. You can print the plan and hang it in the cellar; when printing, all steps are expanded.
The dates in the plan assume typical conditions. Fermentation is slower in a cold cellar and faster in a warm one; time on the pomace for Kakhetian wine can last from 3 to 6 months. At each stage you decide by measuring, not by the calendar: fermentation is over when density stops changing, malolactic fermentation when the malic acid spot has gone.
• Poorly cleaned vessels, or only rinsing with water: the main reason wine turns to vinegar.
• Throwing in rotten berries "so they are not wasted": one bad bunch spoils the whole vessel.
• Punching down the cap too rarely: the cap dries out and turns to vinegar.
• Overfilling the fermentation vessel: foam and the cap overflow.
• Half-empty vessels after fermentation: oxidation, film yeast, vinegar.
• Leaving the wine on its lees too long: a hydrogen sulphide (rotten egg) smell.
• Bottling with an unfinished fermentation: refermentation in the bottle and bursting.
• Storing in a warm room: the wine ages quickly and spoils.
At the end of each step there are links to laboratory pages. If something goes unusually (fermentation does not start, stops, the temperature rises too much, acidity is very high or low) you will find the explanation there, and a calculator that works out the exact amounts.
1. Why must the pomace cap be punched down several times a day?
The cap is in contact with air and heats up. Punching down returns it to the wine: Acetobacter cannot multiply, colour and tannin are extracted better, and the cap and bottom layer reach the same temperature.
2. How do you know alcoholic fermentation has finished?
Bubbles may also disappear when fermentation sticks, and the time depends on temperature. Only density is reliable: below 1.000 and stable.
3. Why can wine not be stored in a half-empty vessel?
After fermentation CO₂ no longer protects the wine. In an empty space oxygen oxidises the wine (browning it, giving an acetaldehyde smell), and film yeast and vinegar appear at the surface.
4. Why is citric acid added to a metabisulphite sanitising solution?
The active form of SO₂ rises sharply as pH falls: at pH 3 it is ≈ 6%, at pH 2 ≈ 40%. Citric acid therefore makes the sanitising solution much more effective.