Home cellar · practical guide
Which vessels to ferment and store wine in: qvevri, glass, plastic, stainless steel, enamel, oak. How many vessels of what size you need, how to fit the wine into your vessels with no empty space, and how much oxygen the wine takes up from the headspace and through the walls.
For fermentation a vessel is filled to 75–80% (foam and the pomace cap). Storage vessels must always be full to the neck, so the calculation looks for a combination of vessels that the wine fills completely; the remaining wine goes into bottles or a topping-up vessel. Loss at each racking ≈ 3%.
1 litre of air at 20 °C contains ≈ 280 mg of oxygen. Wall permeation is computed from the surface area (cylinder, height = 1.5 × diameter) and typical permeability of the material: HDPE/PP ≈ 9, oak ≈ 7.5, PET ≈ 1.2, qvevri (waxed, in the ground) ≈ 1 mg/m²·day. These are approximate, illustrative figures. 1 mg of oxygen "uses up" ≈ 4 mg of SO₂.
A wine vessel has two different jobs. During fermentation it holds the must and the pomace: it needs room for foam and the pomace cap, a wide mouth for punching down, and temperature control. The CO₂ released during fermentation protects the wine from air by itself.
After fermentation the vessel must protect the wine from oxygen. CO₂ is no longer released, and oxygen reaches the wine in two ways: from the air left in the vessel (the headspace) and through the vessel walls and closure. So a storage vessel must always be full to the neck, and its material should let as little oxygen through as possible.
Air is 21% oxygen. At 20 °C one litre of air contains ≈ 280 mg of oxygen. If a 60 L demijohn holds 54 L of wine, the 6 L of air contain ≈ 1680 mg of oxygen, ≈ 31 mg/L for 54 L of wine:
$$O_2 = \frac{V_{\text{air}} \cdot 280}{V_{\text{wine}}}\ \ \text{mg/L}$$
The wine absorbs this oxygen within days to weeks. White wine shows signs of oxidation (darker colour, apple, nut, "sherry" smells) after only 10–20 mg/L of oxygen; red and Kakhetian wines, rich in phenolics, tolerate more, but are not immune either. Each 1 mg of oxygen uses up about 4 mg of SO₂, so in a vessel with air the SO₂ "disappears" quickly and the wine is left unprotected.
Glass, stainless steel and intact enamel are practically impermeable to oxygen. Plastic and wood are not: oxygen slowly diffuses through the wall:
$$\frac{dO_2}{dt} = \frac{P \cdot A}{V}$$
where $P$ is the permeability of the material (mg of oxygen per square metre per day), $A$ the vessel surface area and $V$ the wine volume. Because surface area grows more slowly than volume ($A \propto V^{2/3}$), wine in a small vessel takes up more oxygen per litre than in a large one. That is why a small oak barrel changes wine very quickly.
| Material | Typical permeability, mg/m²·day | In a 60 L vessel, mg/L per year |
|---|---|---|
| Glass, stainless steel, enamel | ≈ 0 | ≈ 0 |
| Qvevri (waxed, in the ground) | ≈ 1 (estimate) | ≈ 5 |
| PET (water carboy) | ≈ 1.2 | ≈ 6 |
| Oak barrel | ≈ 7.5 | ≈ 40 (≈ 25 in a 225 L barrel) |
| HDPE / PP (2 mm wall) | ≈ 9 | ≈ 47 |
These figures are approximate: the permeability of plastic depends on wall thickness and grade, that of oak on wood quality, moisture and barrel age, and that of qvevri on the clay, wax lining and soil. The qvevri figure is an estimate: the oxygen permeability of a buried, waxed qvevri has hardly been measured.
A fermentation vessel should be 20–25% larger than the must volume. When fermenting on skins the volume includes the pomace: crushed grapes take up ≈ 0.93 L per kilogram. When fermenting juice (white, European), a home press gives ≈ 0.62 L of juice per kilogram.
For storage vessels the key is that the wine fills every vessel completely. Several vessels of different sizes are better than one big one: the wine shrinks a little at each racking, and you may need one vessel fewer. You always need one empty vessel for racking, and a small vessel or bottles for topping-up wine.
1. In the "Vessel plan" mode enter the amount of grapes and the style. You will see what fermentation capacity you need and how much wine you will have after two rackings.
2. Choose whether you are buying new demijohns ("standard sizes": 5, 10, 15, 20, 25, 34, 54 L) or have your own vessels. If you have your own, list their capacities separated by commas, e.g. "54, 34, 20, 10, 5". The calculation finds a combination that the wine fills completely and tells you how much wine is left for bottles or topping up.
3. In the "Oxygen and headspace" mode choose the material, vessel capacity, the amount of wine in it and the storage time. You will see how much oxygen the wine takes up from the headspace and through the walls, and how much SO₂ it uses up. The chart also shows the other materials for comparison.
4. "Comparing materials" shows each material's properties, advantages, drawbacks and care.
• For fermenting on skins, use a wide-mouthed vessel: qvevri, a food-grade plastic drum, an enamelled tank, a steel tank. A glass demijohn only for juice fermentation.
• For storage use glass, stainless steel or qvevri. Do not keep wine in plastic for more than a few weeks.
• Always fill vessels to the neck. If there is not enough wine, put it into a smaller vessel or bottles; do not leave a demijohn half full.
• Keep 3–5% of the same wine in bottles for topping up. If you have none, top up with a similar, sound wine, never with water.
• Keep glass vessels in the dark or cover them with cloth: light creates an unpleasant sulphurous smell in wine ("light-struck" taste).
• A small oak barrel (10–50 L) changes wine very quickly: taste it every week and rack when the wood aroma is enough.
• Use an enamelled vessel only if the enamel is intact: a chip or rust contaminates the wine with iron.
1. A 60 L demijohn holds 54 L of wine. How much oxygen will the wine take up from the headspace alone?
6 L of air × 280 mg/L ≈ 1680 mg of oxygen; for 54 L of wine that is ≈ 31 mg/L, quite enough to oxidise a white wine. That is why a storage vessel must always be full to the neck.
2. Why is a food-grade HDPE drum not suitable for storing wine for several months?
HDPE and PP are permeable to oxygen. In a 60 L drum this is tens of mg/L per year, like an oak barrel, but unlike oak it gives the wine nothing in return. HDPE is fine for fermentation, when CO₂ protects the wine.
3. What does a rust spot or a chip in the enamel of an enamelled pot mean?
Wine has a pH of 3–4 and actively dissolves iron. More than 10 mg/L of iron makes wine hazy and dark on contact with air.
4. Your wine does not fill all the demijohns exactly. What is best?
In a half-full demijohn the oxygen in the air oxidises the wine quickly. Keep the rest of the wine in bottles: it will also serve for topping up.