Chapter VI · Modern technology and ageing
The bubbles in sparkling wine are CO₂ from a second fermentation in a closed vessel. How much sugar is needed for the desired pressure, how pressure changes with temperature, how much dosage liqueur to add, and when to bottle a pét-nat so the bottle holds.
In practice the CO₂ yield is ≈ 0.47 g per gram of sucrose (0.51 in theory), and alcohol rises by 1% vol for ≈ 17 g/L of sucrose. Pressure follows Henry's law: dissolved CO₂ = k_H(T)·P, with k_H ≈ 1.75·e^(−0.031(T−10)) g/L·bar in wine (alcohol slightly lowers solubility), and the headspace is treated as an ideal gas. The well-known rule: 24 g/L of sucrose ≈ 6 bar at 10 °C. EU: sparkling wine ≥ 3 bar, quality sparkling wine ≥ 3.5 bar, semi-sparkling (pétillant) 1–2.5 bar (at 20 °C).
At disgorging ≈ 10–25 mL of wine is lost with the sediment and replaced with dosage liqueur (sugar dissolved in wine, usually 500–750 g/L), the rest with the same wine. Sugar of the mixture: (V·S₀ + v·C)/(V + v). Style categories follow EU Regulation 2019/33. When you choose a style, the target field is filled with the middle of the category.
Pét-nat (pétillant naturel) is wine bottled before fermentation is finished; fermentation completes in the bottle. Must sugar (glucose + fructose) yields ≈ 0.46 g of CO₂ per gram. Specific gravity approximately: SG ≈ 0.991 + 0.00039·sugar − 0.0012·(alcohol − 11). This is an approximation; for exact sugar use a sugar test. A champagne bottle withstands ≈ 6–8 bar working pressure, an ordinary wine bottle only ≈ 2–3 bar: it can explode! For safety, 5 and 2 bar (at 20 °C) are used here as limits, because bottles warm up in summer.
The bubbles of sparkling wine are carbon dioxide (CO₂) dissolved in the wine under pressure. It is formed naturally by fermentation: if wine ferments in a closed vessel, the CO₂ cannot escape and dissolves in the wine. When the bottle is opened the pressure drops and the supersaturated solution releases bubbles.
| Method | Second fermentation | Characteristics |
|---|---|---|
| Traditional (champenoise) | in the bottle, with tirage liqueur | long ageing on lees, autolysis notes; Champagne, Cava, Franciacorta |
| Transfer | in the bottle, then transferred to a tank and filtered | similar to traditional, less labour |
| Tank (Charmat) | in a closed tank | fast, fruity; Prosecco |
| Ancestral (pét-nat) | in the bottle, completing the first fermentation | one fermentation, often with sediment, natural style |
| Carbonation | none: CO₂ is added | cheap, coarse bubbles |
1. Base wine (cuvée): an acidic, low-alcohol (10–11.5%) dry wine, often a blend of several varieties and vintages. The grapes are pressed gently as whole bunches (see "Pressing").
2. Tirage: tirage liqueur (sugar, usually ≈ 24 g/L), yeast and a riddling aid are added to the wine; the bottle is closed with a crown cap.
3. Second fermentation: in the bottle at 10–12 °C over a few weeks. Alcohol rises by ≈ 1.3–1.5% and pressure to ≈ 6 bar.
4. Ageing on lees: months or years (in Champagne a minimum of 15 months in bottle for non-vintage, including 12 months on lees). Autolysis gives the wine "brioche" notes, a creamy texture and fine bubbles (see "Ageing on lees").
5. Riddling (remuage): the bottle is gradually inverted and turned so that the sediment collects in the neck (by hand on "pupitres" or automatically on a "gyropalette").
6. Disgorging: the bottle neck is frozen, the cap is removed and the pressure expels the frozen sediment.
7. Dosage: the lost volume is replaced with dosage liqueur (sugar in wine), which sets the style of the wine; the bottle is closed with a cork and wire cage.
The amount of CO₂ produced from the tirage sugar (in practice ≈ 0.47 g per gram of sucrose):
$$m_{CO_2} \approx 0.47\,S_{tirage}.$$
The CO₂ is divided between the liquid and the headspace of the bottle. The CO₂ dissolved in the liquid obeys Henry's law, $C = k_H(T)\,P$, and in the headspace it is an ideal gas:
$$P = \frac{m_{CO_2}}{k_H(T)\,V_l + V_h\,\dfrac{M_{CO_2}}{RT}}.$$
CO₂ solubility ($k_H$) falls sharply as temperature rises, so the pressure in the same bottle is ≈ 6 bar at 10 °C and ≈ 8 bar at 20 °C. The well-known rule: ≈ 4 g/L of sugar gives ≈ 1 bar at 10 °C.
Under the EU classification (at 20 °C): sparkling wine ≥ 3 bar, quality sparkling wine ≥ 3.5 bar, semi-sparkling (pétillant) 1–2.5 bar.
| Style | Sugar, g/L |
|---|---|
| Brut Nature | < 3, no dosage |
| Extra Brut | 0–6 |
| Brut | < 12 |
| Extra Dry | 12–17 |
| Sec (Dry) | 17–32 |
| Demi-Sec | 32–50 |
| Doux | > 50 |
Sugar is less perceptible in acidic wine, so a high-acid base wine often needs a Brut with a small dosage.
The ancestral method is the oldest: the wine is bottled before fermentation is finished and fermentation completes in the bottle. The main difficulty is the moment of bottling: every ≈ 4 g/L of sugar left in the bottle gives ≈ 1 bar. Wine bottled too early will burst the bottle; bottled too late, it will hardly sparkle. Sugar must therefore be measured precisely and only thick-walled champagne bottles used.
In Georgia the tradition of sparkling wine is linked to Imereti (Tsitska, Tsolikouri, Krakhuna); in recent years many Georgian winemakers also make pét-nat.
P. Ribéreau-Gayon et al., "Handbook of Enology", vol. 2 (sparkling wines); G. Liger-Belair, "Uncorked: The Science of Champagne" and studies of CO₂ solubility in Champagne; EU Regulations 2019/33 and 1308/2013 (categories and pressure limits); Comité Champagne. The model coefficients are approximate.
1. In the "Tirage and pressure" mode, enter the tirage sugar, base wine alcohol, CO₂ already dissolved, temperature and bottle size. You will see the pressure at this temperature and at 20 °C, the total CO₂ and the final alcohol. The chart shows how pressure rises with temperature.
2. In the "Dosage" mode, choose a style or enter the target sugar, the residual sugar after disgorging, the liqueur concentration, the bottle size and number. You will see how many mL of liqueur to add to each bottle and how much liqueur and sugar you need in total.
3. In the "Pét-nat" mode, enter the desired pressure, residual sugar, alcohol and bottle type. You will see how much sugar the wine should contain at bottling, what specific gravity this corresponds to, and how sensitive the pressure is to an error in sugar.
• For the second fermentation use a sparkling wine yeast (tolerant of alcohol and pressure), acclimatised to the wine beforehand.
• Use only sparkling wine bottles for tirage and pét-nat. An ordinary wine bottle can explode.
• Before bottling pét-nat, measure the sugar (not only with a hydrometer, which alcohol distorts), and fill a few control bottles in plastic: you can feel their firmness by hand.
• Store the bottles horizontally at 10–14 °C, away from sun and heat.
• Before opening, chill the bottle to 6–8 °C, hold the cork by hand and never point the bottle at anyone's face.
The model coefficients are approximate. To measure the exact pressure there is the aphrometer, a pressure gauge that pierces the bottle closure.
1. Why is cold Champagne safer to open than warm?
CO₂ solubility falls as temperature rises. The same bottle at 6 bar at 10 °C reaches ≈ 8 bar at 20 °C, which is why the cork flies out of a warm bottle.
2. What does Brut Nature mean?
Under the EU classification Brut Nature has no dosage and less than 3 g/L of residual sugar. Brut is up to 12 g/L, Demi-Sec 32–50 g/L.
3. Why must pét-nat not be bottled in an ordinary wine bottle?
Every 4 g/L of sugar left at 10 °C creates ≈ 1 bar. An ordinary bottle cannot withstand this and the danger of explosion is real. Pét-nat uses a thick-walled champagne bottle and a crown cap.