Chapter VI · Modern technology and ageing
At bottling wine meets oxygen for the last time: oxygen dissolved in the wine and in the headspace of the bottle, and afterwards oxygen entering through the closure. How much oxygen wine picks up at bottling, how long SO₂ lasts with different closures, and how much warm storage speeds up bottle ageing.
Total package oxygen (TPO) = oxygen dissolved in the wine + oxygen in the headspace, divided by the bottle volume. 1 mL of air contains ≈ 0.28 mg of oxygen (20 °C). Oxygen share in the headspace: air 21%, CO₂ flushing ≈ 5%, nitrogen ≈ 2%. Headspace: ≈ 5–15 mL under a cork, ≈ 30–60 mL under a screwcap, so flushing the headspace is especially important with screwcaps. Guide: TPO < 1 mg/L is good, 1–2 acceptable, > 2 high. 1 mg of oxygen consumes ≈ 4 mg of free SO₂.
Closure oxygen transmission rate (OTR, mg O₂ per closure per year, estimates): natural ≈ 0.5 (plus ≈ 1 mg in the first months from the cork cells), technical ≈ 1.0, synthetic ≈ 2.5, Saranex ≈ 0.6, Saran-tin ≈ 0.05, glass ≈ 0.1. Natural corks vary greatly from one to another. The bottling oxygen (TPO) is consumed in the first ≈ 2–3 months. With Saran-tin screwcaps very low oxygen raises the risk of reduction.
The rate of chemical reactions follows the Arrhenius law: every 10 °C multiplies the rate by Q10 (≈ 2–3 for ageing reactions). The reference is 13 °C, the classic cellar temperature. Because the rate is exponential, a fluctuating temperature ages wine more than a constant temperature with the same mean (the "effective temperature" is above the mean). The model is general: different reactions (colour, aroma, oxidation) have different Q10 values.
Bottling is the last and one of the most critical operations in winemaking. After it the wine can no longer be treated: whatever got into the bottle (oxygen, microorganisms, sediment) stays with the wine for its whole life. Before bottling the wine must be stable (protein and tartrate tests, see Chapter IV), microbiologically clean (filtration or enough SO₂), and with free SO₂ at the target level.
At bottling wine picks up oxygen from two sources:
1. Oxygen dissolved in the wine (DO): ≈ 0.5–2 mg/L after pumping, filtration and passing through the filler.
2. Oxygen in the headspace of the bottle (between the wine and the closure). 1 mL of air contains ≈ 0.28 mg of oxygen.
$$TPO = DO + \frac{V_h\,x_{O_2}\,\rho_{O_2}}{V_b}.$$
The headspace under a cork is ≈ 5–15 mL, under a screwcap 30–60 mL. 60 mL of air in a 750 mL bottle amounts to ≈ 2.2 mg/L, often more than the dissolved oxygen. The headspace is therefore flushed by vacuum, CO₂ or nitrogen. Guide: TPO < 1 mg/L is good, 1–2 acceptable, > 2 high.
The bottling oxygen is consumed in the first 2–3 months. One mg of oxygen "burns" ≈ 4 mg of free SO₂, which is why wine often suffers "bottle shock" after bottling: for a few weeks it is closed and lacks aroma.
| Closure | OTR, mg O₂ per year | Characteristics |
|---|---|---|
| Natural cork | ≈ 0.1–1 (+ ≈ 1 mg in the first months) | traditional; variable; TCA risk |
| Technical (agglomerated) cork | ≈ 0.5–1.5 | cheap, for short-term storage |
| Synthetic | ≈ 1–3 | for young wine, 1–2 years |
| Screwcap, Saranex | ≈ 0.3–0.8 | moderate oxygen, consistent |
| Screwcap, Saran-tin | ≈ 0.02–0.1 | almost airtight: risk of reduction |
| Glass stopper | ≈ 0.05–0.2 | aesthetic, airtight |
Cork (the bark of Quercus suber) is elastic and porous, so it lets small amounts of oxygen through. When the cork is driven into the bottle, air is squeezed out of its cells and gives the wine an extra ≈ 1 mg of oxygen in the first months. The oxygen transmission of natural corks can differ tenfold or more, which is one reason why bottles of the same wine differ.
The main fault of cork is 2,4,6-trichloroanisole (TCA), the mouldy "corked" smell that is perceptible at nanograms (a few ng per litre) (see Chapter VII).
In the bottle slow chemical reactions take place in the wine: polymerisation of tannins and anthocyanins (the colour changes, tannin softens), changes in aroma (fruit fades, the ageing "bouquet" forms), hydrolysis and formation of esters. Their rate follows the Arrhenius law:
$$k(T) = k_{13}\,Q_{10}^{(T-13)/10}.$$
If $Q_{10} \approx 2$, wine at 23 °C ages twice as fast as at 13 °C. Because the rate is exponential, with a fluctuating temperature the mean rate is higher than the rate at the mean temperature:
$$\bar k = \frac{1}{T_p}\int_0^{T_p} k\bigl(T(t)\bigr)\,dt \;>\; k(\bar T).$$
In addition, with temperature swings the wine expands and contracts and "breathes" air through the cork. Ideal storage: 10–15 °C with little fluctuation, 60–75% humidity, darkness, no vibration, cork-closed bottles lying horizontally so that the cork does not dry out.
P. Ribéreau-Gayon et al., "Handbook of Enology", vol. 2 (bottling, closures, bottle ageing); P. Lopes et al., "Impact of oxygen dissolved at bottling and transmitted through closures on the composition and sensory properties of a Sauvignon Blanc wine during bottle storage", J. Agric. Food Chem. 57 (2009); M. Ugliano, "Oxygen contribution to wine aroma evolution during bottle aging", J. Agric. Food Chem. 61 (2013); AWRI closure trial. OTR values are estimates and vary by manufacturer.
1. In the "Oxygen at bottling" mode, enter the oxygen dissolved in the wine, the bottle volume, the headspace and the gas filling it. You will see the total package oxygen (TPO), how much of it is in the headspace, and how much free SO₂ the wine will use. The chart compares the three gases.
2. In the "Closure and SO₂" mode, choose the closure and enter the free SO₂ and TPO at bottling, the storage time and the minimum SO₂. You will see how much SO₂ remains, when it falls to the minimum, and how high the reduction risk is. The chart shows all six closures.
3. In the "Storage temperature" mode, enter the mean temperature, the annual swing, the storage time and Q10. You will see how fast the wine ages relative to 13 °C, the effective temperature and the "chemical" age of the wine.
• Measure the wine before bottling: free SO₂ (≈ 30–35 mg/L for white, ≈ 25–30 for red, depending on pH; see Chapter IV), stability tests and, ideally, dissolved oxygen.
• Flush the bottles with CO₂ or nitrogen before filling, or fill from the bottom with a hose so that the wine does not splash.
• Choose corks of the right size and store them in a clean, dry place. Leave the bottle upright for a few minutes after corking so the cork can expand.
• For young, fruity wine use a screwcap or synthetic cork; for wine to age use a quality natural cork or Saranex.
• Store bottles in a dark, cool (10–15 °C) place with a stable temperature. A cupboard in a flat warms above 25 °C in summer and ages wine twice as fast or more.
The model numbers are illustrative and depend on the closure manufacturer and the wine.
1. Why does a bottle closed with a screwcap carry a greater oxygen risk at bottling?
60 mL of air contains ≈ 17 mg of oxygen, that is ≈ 2.2 mg/L in a 750 mL bottle. With screwcaps the headspace is therefore flushed with CO₂ or nitrogen.
2. Why does a fluctuating temperature age wine more than a constant temperature with the same mean?
The Arrhenius law is a convex function, so the mean rate is higher than the rate at the mean temperature. In addition, with temperature swings the wine expands and contracts and "breathes" air through the cork.
3. Which closure lets the least oxygen through?
The Saran-tin liner contains a tin layer that lets almost no oxygen through. This preserves fresh aroma but raises the risk of reductive (sulphurous) smells.